RU/2: Форум. Общение пользователей и разработчиков OS/2 (eCS). : IrDA v030


Список сообщений | Написать новое | Ответить на сообщение | Домой Поиск:
Предыдущее сообщение | Следующее сообщение
From : Vladislav
To : Nikolay
Subj : IrDA v030
Спасибо, получил!

Инструкция ли :)

Mini FAQ (030b)
Пользователь: Kolo (IP-адрес скрыт)
Дата: 22, November, 2006 01:15

Hello Nikolay!

Hello, Marko!

M.
I would like to try your new beta, if there anything else I can provide
you with, just say it.
Is there anything I could test for you?
I have an IBM Thinkpad R50p which has also an IBM SC-20H2987 IrDA device
build in.
N.
I any more do not support exotic internal IrDA devices. There is no time. I do not have these devices.
The basic emphasis widespread(distributed) USB to devices.
Whether but, please, send me report from Hardware Manager about irda_phy.sys. With IBM driver.
It works on 4mbit?
M.
The internal Thinkpad is working for me.
N.
My driver? This work with UART in IrDA mode.

M.
What do you mean, how do I do that?
I have no entry in Hardware manager.
N.
My driver not register in Resource Manager. Completely. Is to do...
IBM driver register in Resource Manager only if resource are free. Them can
intercept COM.SYS .
But both work correctly.

About incompatibility FAT32. IFS and IrDA I did not hear. FAT32 now I do not
use. I shall try.
M.
I think it is some problem with memory, because on the fresh install
(eCS 2.0 Beta 2) it is working.
N.
is good

030b:
With STIR 4200 use "S" key as external device.
pmirda.exe [[[[ LOG_ENABLE] TIMER_DISCOVERY ] EXTERNAL_DEVICE ] MODE ]
Sample (log disabled):
pmirda.exe N 1500 S

M.
I could not get PMIRDA running. :-(
No popup log, nothing.
N.
Not say "IRCOMM.SYS driver not loaded, cannot continue!" ?
Remove from XCenter IrDA plugin.

M.
Here is my config.sys:
DEVICE=L:OS2BOOTUSBCOM.SYS /V /Z
N.
For IrDA need for MA-620. For StIR4200 need USBRESMG.SYS
M.
REM Begin IBM OS/2 IrDA Driver Section
DEVICE=L:IRDD2IRDA_PHY.OS2 /X
N.
/X for my driver only ( version 020 or later )
M.
DEVICE=L:IRDD2IRDA_DD.OS2
DEVICE=L:IRDD2IAS_DD.OS2
Rem DEVICE=L:IRDD2IRCOMM.SYS /V
N.
uncomment IRCOMM.SYS
PMIRDA works over IRCOMM.SYS And over IRDA_PHY.OS2, if in external mode.
And communication apps connect to phone modem via comport, emulated IRCOMM.SYS.
Without IRCOMM.SYS works only IRDANDIS. (IrLAN)
M.
REM End IBM OS/2 IrDA Driver Section

Like I said in Hardware manager there is nothing about IrDA physical
driver, but all seem to load OK.
N.
In external mode IRDA_PHY.OS2 not used any resource.

M.
Now it works. :-)
The GSM Phone is detected.
The irda widget was the problem.

I have tryed to enable log in PMIRDA, but I saw no file created. ?
N.
pmirda L 1500 S ?
Case sensitivity.
This create file mmddhhmm.log. Size is large ...

M.
I have modified your readme.gne with info about STIr4200, I hope it will be usefull to you.
...
N.
Good! Thank!
I paste to my phorum. Simle FAQ
I write the readme there is no time and laziness



Mon 06 Aug 2007 22:37 Mozilla/5.0 (OS/2; U; Warp 4.5; en-US; rv:1.6) Gecko/2005052



Programmed by Dmitri Maximovich, Dmitry I. Platonoff, Eugen Kuleshov.
25.09.99 (c) 1999, RU/2. All rights reserved.
Rewritten by Dmitry Ban. All rights ignored.