RU/2: Форум. Общение пользователей и разработчиков OS/2 (eCS). : Ответить на сообщение

Имя:
e-mail:
FIDO:
Home page:
сохранить данные о вас

Тема:

> Спасибо, получил!
> 
> Инструкция ли :)
> 
> Mini FAQ (030b)
> Пользователь: Kolo (IP-адрес скрыт)
> Дата: 22, November, 2006 01:15
> 
> Hello Nikolay!
> 
> Hello, Marko!
> 
> M.
> I would like to try your new beta, if there anything else I can provide
> you with, just say it.
> Is there anything I could test for you?
> I have an IBM Thinkpad R50p which has also an IBM SC-20H2987 IrDA device
> build in.
> N.
> I any more do not support exotic internal IrDA devices. There is no time. I do not have these devices.
> The basic emphasis widespread(distributed) USB to devices.
> Whether but, please, send me report from Hardware Manager about irda_phy.sys. With IBM driver.
> It works on 4mbit?
> M.
> The internal Thinkpad is working for me.
> N.
> My driver? This work with UART in IrDA mode.
> 
> M.
> What do you mean, how do I do that?
> I have no entry in Hardware manager.
> N.
> My driver not register in Resource Manager. Completely. Is to do...
> IBM driver register in Resource Manager only if resource are free. Them can
> intercept COM.SYS .
> But both work correctly.
> 
> About incompatibility FAT32. IFS and IrDA I did not hear. FAT32 now I do not
> use. I shall try.
> M.
> I think it is some problem with memory, because on the fresh install
> (eCS 2.0 Beta 2) it is working.
> N.
> is good
> 
> 030b:
> With STIR 4200 use "S" key as external device.
> pmirda.exe [[[[ LOG_ENABLE] TIMER_DISCOVERY ] EXTERNAL_DEVICE ] MODE ]
> Sample (log disabled):
> pmirda.exe N 1500 S
> 
> M.
> I could not get PMIRDA running. :-(
> No popup log, nothing.
> N.
> Not say "IRCOMM.SYS driver not loaded, cannot continue!" ?
> Remove from XCenter IrDA plugin.
> 
> M.
> Here is my config.sys:
> DEVICE=L:OS2BOOTUSBCOM.SYS /V /Z
> N.
> For IrDA need for MA-620. For StIR4200 need USBRESMG.SYS
> M.
> REM Begin IBM OS/2 IrDA Driver Section
> DEVICE=L:IRDD2IRDA_PHY.OS2 /X
> N.
> /X for my driver only ( version 020 or later )
> M.
> DEVICE=L:IRDD2IRDA_DD.OS2
> DEVICE=L:IRDD2IAS_DD.OS2
> Rem DEVICE=L:IRDD2IRCOMM.SYS /V
> N.
> uncomment IRCOMM.SYS
> PMIRDA works over IRCOMM.SYS And over IRDA_PHY.OS2, if in external mode.
> And communication apps connect to phone modem via comport, emulated IRCOMM.SYS.
> Without IRCOMM.SYS works only IRDANDIS. (IrLAN)
> M.
> REM End IBM OS/2 IrDA Driver Section
> 
> Like I said in Hardware manager there is nothing about IrDA physical
> driver, but all seem to load OK.
> N.
> In external mode IRDA_PHY.OS2 not used any resource.
> 
> M.
> Now it works. :-)
> The GSM Phone is detected.
> The irda widget was the problem.
> 
> I have tryed to enable log in PMIRDA, but I saw no file created. ?
> N.
> pmirda L 1500 S ?
> Case sensitivity.
> This create file mmddhhmm.log. Size is large ...
> 
> M.
> I have modified your readme.gne with info about STIr4200, I hope it will be usefull to you.
> ...
> N.
> Good! Thank!
> I paste to my phorum. Simle FAQ
> I write the readme there is no time and laziness
> 
>

_, _, _, _, _ _, _,_ (_ \| / \ \|\ \| / \ \|_/ , ) \| , \ / \| \\| \ / \| \ ~ ~~~ ~ ~ ~ ~ ~ ~