RU/2: Форум. Общение пользователей и разработчиков OS/2 (eCS). : Ответить на сообщение

Имя:
e-mail:
FIDO:
Home page:
сохранить данные о вас

Тема:

> Немного дополнительной информации. Вдруг прольёт свет на проблему...
> 
> Linux version 2.6.18.1 (root@puppypc) (gcc version 3.4.4) #1 Thu Apr 19 07:47:47 PUP 2007
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000e8800 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
>  BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data)
>  BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
>  BIOS-e820: 00000000fffe8800 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 127MB LOWMEM available.
> On node 0 totalpages: 32752
>   DMA zone: 4096 pages, LIFO batch:0
>   Normal zone: 28656 pages, LIFO batch:7
> DMI 2.3 present.
> ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6de0
> ACPI: RSDT (v001 PTLTD    RSDT   0x00000001  LTP 0x00000000) @ 0x07ffb07a
> ACPI: FADT (v001 IBM    430BX    0x00000001 PTL  0x000f4240) @ 0x07fffb65
> ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x00000001  LTP 0x00000001) @ 0x07fffbd9
> ACPI: DSDT (v001    IBM      BT2 0x00000001 MSFT 0x01000007) @ 0x00000000
> ACPI: BIOS age (1999) fails cutoff (2002), acpi=force is required to enable ACPI
> ACPI: Disabling ACPI support
> Allocating PCI resources starting at 10000000 (gap: 08000000:f7fe8800)
> Detected 447.699 MHz processor.
> Built 1 zonelists.  Total pages: 32752
> Kernel command line: initrd=initrd.gz pmedia=cd layerfs=aufs BOOT_IMAGE=vmlinuz 
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 512 (order: 9, 2048 bytes)
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Memory: 124536k/131008k available (2414k kernel code, 5920k reserved, 797k data, 176k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay using timer specific routine.. 895.99 BogoMIPS (lpj=4479996)
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
> CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU serial number disabled.
> CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Compat vDSO mapped to ffffe000.
> CPU: Intel Pentium III (Coppermine) stepping 01
> Checking 'hlt' instruction... OK.
> checking if image is initramfs... it is
> Freeing initrd memory: 1192k freed
> NET: Registered protocol family 16
> EISA bus registered
> PCI: PCI BIOS revision 2.10 entry at 0xfd9c5, last bus=4
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> PnPBIOS: Scanning system for PnP BIOS support...
> PnPBIOS: Found PnP BIOS installation structure at 0xc00f6e90
> PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x87d0, dseg 0x400
> PnPBIOS: Unknown tag '0x82', length '25'.
> PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
> SCSI subsystem initialized
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> PCI quirk: region 1000-103f claimed by PIIX4 ACPI
> PCI quirk: region 1040-104f claimed by PIIX4 SMB
> PIIX4 devres B PIO at 0760-0760
> PIIX4 devres E PIO at 03b8-03bf
> PIIX4 devres G PIO at 002e-002f
> PCI: Firmware left 0000:00:06.0 e100 interrupts enabled, disabling
> Boot video device is 0000:01:00.0
> PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:02.0
> pnp: 00:00: ioport range 0x760-0x760 has been reserved
> pnp: 00:00: ioport range 0x1050-0x105f has been reserved
> pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
> pnp: 00:0b: ioport range 0x1000-0x103f has been reserved
> pnp: 00:0b: ioport range 0x1040-0x104f has been reserved
> PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
> PCI: Bridge: 0000:00:01.0
>   IO window: disabled.
>   MEM window: f4200000-f47fffff
>   PREFETCH window: f5000000-f5ffffff
> PCI: Bus 2, cardbus bridge: 0000:00:03.0
>   IO window: 00001800-000018ff
>   IO window: 00001c00-00001cff
>   PREFETCH window: 12000000-13ffffff
>   MEM window: 14000000-15ffffff
> PCI: Bus 6, cardbus bridge: 0000:00:03.1
>   IO window: 00002000-000020ff
>   IO window: 00002400-000024ff
>   PREFETCH window: 16000000-17ffffff
>   MEM window: 18000000-19ffffff
> PCI: setting IRQ 11 as level-triggered
> PCI: Found IRQ 11 for device 0000:00:03.0
> PCI: Sharing IRQ 11 with 0000:00:03.1
> PCI: Sharing IRQ 11 with 0000:01:00.0
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> PCI: Found IRQ 11 for device 0000:00:03.1
> PCI: Sharing IRQ 11 with 0000:00:03.0
> PCI: Sharing IRQ 11 with 0000:01:00.0
> PCI: Setting latency timer of device 0000:00:03.1 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> TCP established hash table entries: 4096 (order: 2, 16384 bytes)
> TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
> TCP: Hash tables configured (established 4096 bind 2048)
> TCP reno registered
> Simple Boot Flag at 0x40 set to 0x1
> squashfs: version 3.1 (2006/08/19) Phillip Lougher
> NTFS driver 2.1.27 [Flags: R/W].
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler cfq registered (default)
> Limiting direct PCI/PCI transfers.
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12ac
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> pnp: Device 00:0f activated.
> 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> RAMDISK driver initialized: 16 RAM disks of 13824K size 1024 blocksize
> loop: loaded (max 8 devices)
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller at PCI slot 0000:00:02.1
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio
>     ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> hda: IBM-DARA-212000, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdc: CRN-8241B, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 23579136 sectors (12072 MB) w/418KiB Cache, CHS=23392/16/63, UDMA(33)
> hda: cache flushes not supported
>  hda: hda1
> libata version 2.00 loaded.
> PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI Shortcut mode
> Freeing unused kernel memory: 176k freed
> Time: tsc clocksource has been installed.
> input: AT Translated Set 2 keyboard as /class/input/input0
> hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.20
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> IBM TrackPoint firmware: 0x0b, buttons: 3/3
> input: TPPS/2 IBM TrackPoint as /class/input/input1
> USB Universal Host Controller Interface driver v3.0
> PCI: Found IRQ 11 for device 0000:00:02.2
> uhci_hcd 0000:00:02.2: UHCI Host Controller
> uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:02.2: irq 11, io base 0x00001060
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> aufs 20070423
> fuse init (API version 7.8)
> fuse distribution version: 2.6.3
> ISO 9660 Extensions: RRIP_1991A
> ISO 9660 Extensions: RRIP_1991A
> aufs test_add:397:mount[1355]: uid/gid/perm 0/0/0755 for /pup_ro2 (0/0/01777)
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected an Intel 440BX Chipset.
> agpgart: AGP aperture is 64M @ 0xf8000000
> piix4_smbus 0000:00:02.3: Found 0000:00:02.3 device
> piix4_smbus 0000:00:02.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
> piix4_smbus: probe of 0000:00:02.3 failed with error -1
> Yenta: CardBus bridge found at 0000:00:03.0 [1014:0138]
> Yenta: Enabling burst memory read transactions
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:00:03.0, mfunc 0x00002000, devctl 0x64
> Yenta: ISA IRQ mask 0x0698, PCI irq 11
> Socket status: 30000006
> Yenta: CardBus bridge found at 0000:00:03.1 [1014:0138]
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:00:03.1, mfunc 0x00002000, devctl 0x64
> Yenta: ISA IRQ mask 0x0698, PCI irq 11
> Socket status: 30000006
> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
> PCI: Found IRQ 11 for device 0000:00:06.0
> e100: eth0: e100_probe: addr 0xf4100000, irq 11, MAC addr 00:D0:59:01:BC:B0
> PCI: setting IRQ 5 as level-triggered
> PCI: Found IRQ 5 for device 0000:00:07.0
> ESS Solo-1 reset failed
> snd_es1938_write_cmd timeout (0x02c6/0x0280)
> snd_es1938_write_cmd timeout (0x02b9/0x0280)
> snd_es1938_write_cmd timeout (0x022/0x0280)
> snd_es1938_write_cmd timeout (0x02c0/0x0280)
> snd_es1938_write_cmd timeout (0x02b1/0x0280)
> snd_es1938_write_cmd timeout (0x02b1/0x0280)
> snd_es1938_write_cmd timeout (0x025f/0x0280)
> snd_es1938_write_cmd timeout (0x02c0/0x0280)
> snd_es1938_write_cmd timeout (0x02b2/0x0280)
> snd_es1938_write_cmd timeout (0x02b2/0x0280)
> snd_es1938_write_cmd timeout (0x025f/0x0280)
> snd_es1938_write_cmd timeout (0x02d1/0x0280)
> gameport: ES1938 is pci0000:00:07.0/gameport0, io 0x1430, speed 1065kHz
> pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
> pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
> pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
> cs: IO port probe 0xc00-0xcff: clean.
> cs: IO port probe 0xc00-0xcff: clean.
> cs: IO port probe 0x820-0x8ff: clean.
> cs: IO port probe 0x820-0x8ff: clean.
> cs: IO port probe 0x3e0-0x4ff: clean.
> cs: IO port probe 0x3e0-0x4ff: clean.
> cs: IO port probe 0x100-0x3af: clean.
> cs: IO port probe 0x100-0x3af: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> IBM machine detected. Enabling interrupts during APM calls.
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> usb 1-1: new full speed USB device using uhci_hcd and address 2
> usb 1-1: configuration #1 chosen from 1 choice
> scsi0 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
>   Vendor:           Model: USB DISK 2.0      Rev: PMAP
>   Type:   Direct-Access                      ANSI SCSI revision: 04
> SCSI device sda: 15124992 512-byte hdwr sectors (7744 MB)
> sda: Write Protect is off
> sda: Mode Sense: 23 00 00 00
> sda: assuming drive cache: write through
> SCSI device sda: 15124992 512-byte hdwr sectors (7744 MB)
> sda: Write Protect is off
> sda: Mode Sense: 23 00 00 00
> sda: assuming drive cache: write through
>  sda: sda1
> sd 0:0:0:0: Attached scsi removable disk sda
> usb-storage: device scan complete
> 
>

__, _, __, _,_ _, _ \|_ / \ \|_) \| \| \|\/\| \| \ / \| \ \| \| \| \| ~ ~ ~ ~ `~' ~ ~