RU/2: Форум. Общение пользователей и разработчиков OS/2 (eCS). : Ответить на сообщение

Имя:
e-mail:
FIDO:
Home page:
сохранить данные о вас

Тема:

> > А можно весь лог в студию ?
> > 
> > pci.exe -p -m >pci.log.html
> 
> Можно. Правда, -m параметра в моей pci.exe нет.
> 
> Craig Hart's PCI+AGP bus sniffer, version 0.49vkB, freeware made in 1996-2004.
> Loaded Vendor Data : "This is version 480 of this file; 08-07-2004 (D-M-Y)."
> 
> PCI BIOS Version 2.10 found!
> Number of PCI Busses : 4
> PCI Characteristics  : Config Mechanism 1 
> 
> Searching for PCI Devices using the OEMHLP$ driver
> 
>  Vendor 8086h Intel Corporation
>  Device 2774h Unknown
>  Command 0006h (Memory Access, BusMaster)
>  Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., Received Master Abort, Fast Timing)
>  Revision 81h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Bridge, type PCI to HOST
>  Subsystem ID 81781043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  New Capabilities List Present:
>    Vendor-Dependant Capability
> 
>  Vendor 8086h Intel Corporation
>  Device 2775h Unknown
>  Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
>  Status 0010h (Has Capabilities List, Fast Timing)
>  Revision 81h, Header Type 01h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  Cache line size 16 Bytes (4 DWords)
>  PCI Class Bridge, type PCI to PCI
>  System IRQ 10, INT# A
>  PCI Bridge Information:
>    Primary Bus Number 0, Secondary Bus Number 3, Subordinate bus number 3
>    Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
>    Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
>    Secondary Bus Latency 00h
>    I/O Port Range Passed to Secondary Bus : E000h to EFFFh (16-bit)
>    Memory   Range Passed to Secondary Bus : DFF00000h to DFFFFFFFh
>    Prefectchable Memory Range Passed to Secondary Bus : 00000000E0000000h to 00000000EFFFFFFFh
>  New Capabilities List Present:
>    Unknown Capability (Code 0Dh)!!
>    Power Management Capability, Version 1.1
>      Does not support low power State D1 or D2
>      Supports PME# from mode(s) D0, D3hot, D3cold
>      Current Power State : D0 (Device operational, no power saving)
>    Message Signalled Interrupt Capability
>      MSI is disabled
>      MSI function can generate 32-bit addresses
>    PCI Express Capability, Version 1
>      Device/Port Type : Root port of PCI Express Root Complex
>      Port is an Expansion Slot
>      Unsupported Request Severity is Non-Fatal
>      Maximum Link speed : 2.5Gb/s
>      Maximum Link Width : x16
>      Link Port Number   : 2
>      Common Clock Configuration In Use
>      Current Link speed : 2.5Gb/s
>      Current Link Width : x16
>      Physical slot Number 0
> 
>  Vendor 8086h Intel Corporation
>  Device 27D0h Unknown
>  Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
>  Status 0010h (Has Capabilities List, Fast Timing)
>  Revision 01h, Header Type 81h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  Cache line size 16 Bytes (4 DWords)
>  PCI Class Bridge, type PCI to PCI
>  System IRQ 10, INT# A
>  PCI Bridge Information:
>    Primary Bus Number 0, Secondary Bus Number 2, Subordinate bus number 2
>    Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
>    Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
>    Secondary Bus Latency 00h
>    I/O Port Range Passed to Secondary Bus : D000h to DFFFh (16-bit)
>    Memory   Range Passed to Secondary Bus : None
>    Prefectchable Memory Range Passed to Secondary Bus : None
>  New Capabilities List Present:
>    PCI Express Capability, Version 1
>      Device/Port Type : Root port of PCI Express Root Complex
>      Port is an Expansion Slot
>      Unsupported Request Severity is Non-Fatal
>      AUX Power Detected
>      Maximum Link speed : 2.5Gb/s
>      Maximum Link Width : x2
>      Link Port Number   : 1
>      Common Clock Configuration In Use
>      Current Link speed : 2.5Gb/s
>      Current Link Width : x0
>      Hot Plug Surprise is Possible
>      Hot Plug Capable
>      Physical slot Number 0
>    Message Signalled Interrupt Capability
>      MSI is disabled
>      MSI function can generate 32-bit addresses
>    Unknown Capability (Code 0Dh)!!
>    Power Management Capability, Version 1.1
>      Does not support low power State D1 or D2
>      Supports PME# from mode(s) D0, D3hot, D3cold
>      Current Power State : D0 (Device operational, no power saving)
> 
>  Vendor 8086h Intel Corporation
>  Device 27C8h Unknown
>  Command 0005h (I/O Access, BusMaster)
>  Status 0280h (Supports Back-To-Back Trans., Medium Timing)
>  Revision 01h, Header Type 80h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Serial, type USB (UHCI)
>  Subsystem ID 81791043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 4 is an I/O Port : 00009000h
>  System IRQ 11, INT# A
> 
>  Vendor 8086h Intel Corporation
>  Device 27C9h Unknown
>  Command 0005h (I/O Access, BusMaster)
>  Status 0280h (Supports Back-To-Back Trans., Medium Timing)
>  Revision 01h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Serial, type USB (UHCI)
>  Subsystem ID 81791043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 4 is an I/O Port : 00009400h
>  System IRQ 5, INT# B
> 
>  Vendor 8086h Intel Corporation
>  Device 27CAh Unknown
>  Command 0005h (I/O Access, BusMaster)
>  Status 0280h (Supports Back-To-Back Trans., Medium Timing)
>  Revision 01h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Serial, type USB (UHCI)
>  Subsystem ID 81791043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 4 is an I/O Port : 00009800h
>  System IRQ 3, INT# C
> 
>  Vendor 8086h Intel Corporation
>  Device 27CBh Unknown
>  Command 0005h (I/O Access, BusMaster)
>  Status 0280h (Supports Back-To-Back Trans., Medium Timing)
>  Revision 01h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Serial, type USB (UHCI)
>  Subsystem ID 81791043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 4 is an I/O Port : 0000A000h
>  System IRQ 5, INT# D
> 
>  Vendor 8086h Intel Corporation
>  Device 27CCh Unknown
>  Command 0006h (Memory Access, BusMaster)
>  Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
>  Revision 01h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Serial, type USB 2.0 (EHCI)
>  Subsystem ID 81791043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 0 is a Memory Address (anywhere in 0-4GiB) : DFDFF800h
>  System IRQ 11, INT# A
>  New Capabilities List Present:
>    Power Management Capability, Version 1.1
>      Does not support low power State D1 or D2
>      current requirement for 3.3Vaux: 375 mA
>      Supports PME# from mode(s) D0, D3hot, D3cold
>      Current Power State : D0 (Device operational, no power saving)
>    Debug Port Capability
> 
>  Vendor 8086h Intel Corporation
>  Device 244Eh 82801BA/CA/DB/DBL/EB/ER (ICH2/3/4/4-L/5/5R), 6300ESB Hub Interface to PCI Bridge
>  Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
>  Status 0010h (Has Capabilities List, Fast Timing)
>  Revision E1h, Header Type 01h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Bridge, type PCI to PCI (Subtractive Decode)
>  PCI Bridge Information:
>    Primary Bus Number 0, Secondary Bus Number 1, Subordinate bus number 1
>    Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
>    Secondary Bus Status  2280h (Supports Back-To-Back Trans., Received Master Abort, Medium Timing)
>    Secondary Bus Latency 20h
>    I/O Port Range Passed to Secondary Bus : C000h to CFFFh (16-bit)
>    Memory   Range Passed to Secondary Bus : DFE00000h to DFEFFFFFh
>    Prefectchable Memory Range Passed to Secondary Bus : None
>  New Capabilities List Present:
>    Unknown Capability (Code 0Dh)!!
> 
>  Vendor 8086h Intel Corporation
>  Device 27B8h Unknown
>  Command 0007h (I/O Access, Memory Access, BusMaster)
>  Status 0210h (Has Capabilities List, Medium Timing)
>  Revision 01h, Header Type 80h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Bridge, type PCI to ISA
>  Subsystem ID 81791043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  New Capabilities List Present:
>    Vendor-Dependant Capability
> 
>  Vendor 8086h Intel Corporation
>  Device 27DFh Unknown
>  Command 0005h (I/O Access, BusMaster)
>  Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans., Medium Timing)
>  Revision 01h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Storage, type IDE
>  PCI EIDE Controller Features :
>    BusMaster EIDE is supported
>    Primary   Channel is at I/O Port 01F0h and IRQ 14
>    Secondary Channel is at I/O Port 0170h and IRQ 15
>  Subsystem ID 81791043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 0 is an I/O Port : 00000000h
>  Address 1 is an I/O Port : 00000000h
>  Address 2 is an I/O Port : 00000000h
>  Address 3 is an I/O Port : 00000000h
>  Address 4 is an I/O Port : 0000FFA0h
>  System IRQ (disabled), INT# A
> 
>  Vendor 8086h Intel Corporation
>  Device 27C0h Unknown
>  Command 0007h (I/O Access, Memory Access, BusMaster)
>  Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
>  Revision 01h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Storage, type IDE
>  PCI EIDE Controller Features :
>    BusMaster EIDE is supported
>    Primary   Channel is in native mode at Addresses 0 & 1
>    Secondary Channel is in native mode at Addresses 2 & 3
>  Subsystem ID 26011043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 0 is an I/O Port : 0000B800h
>  Address 1 is an I/O Port : 0000B400h
>  Address 2 is an I/O Port : 0000B000h
>  Address 3 is an I/O Port : 0000A800h
>  Address 4 is an I/O Port : 0000A400h
>  Address 5 is a Memory Address (anywhere in 0-4GiB) : DFDFFC00h
>  System IRQ 5, INT# B
>  New Capabilities List Present:
>    Power Management Capability, Version 1.1
>      Does not support low power State D1 or D2
>      Supports PME# from mode(s) D3hot
>      Current Power State : D0 (Device operational, no power saving)
> 
>  Vendor 8086h Intel Corporation
>  Device 27DAh Unknown
>  Command 0001h (I/O Access)
>  Status 0280h (Supports Back-To-Back Trans., Medium Timing)
>  Revision 01h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  PCI Class Serial, type SMBus Controller
>  Subsystem ID 81791043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 4 is an I/O Port : 00000400h
>  System IRQ (disabled), INT# B
> 
>  Vendor 1102h Creative Labs
>  Device 0002h EMU10K1 Audio Chipset (SB Live!)
>  Command 0005h (I/O Access, BusMaster)
>  Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
>  Revision 07h, Header Type 80h, Bus Latency 40h
>  Self test 00h (Self test not supported)
>  PCI Class Multimedia, type Audio
>  Subsystem ID 80261102h CT4830 SBLive! Value
>  Subsystem Vendor 1102h Creative Labs
>  Address 0 is an I/O Port : 0000C000h
>  System IRQ 5, INT# A
>  New Capabilities List Present:
>    Power Management Capability, Version 1.0
>      Supports low power State D1
>      Supports low power State D2
>      Does not support PME# signalling
>      Current Power State : D0 (Device operational, no power saving)
> 
>  Vendor 1102h Creative Labs
>  Device 7002h PCI Gameport
>  Command 0005h (I/O Access, BusMaster)
>  Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
>  Revision 07h, Header Type 80h, Bus Latency 40h
>  Self test 00h (Self test not supported)
>  PCI Class Input, type Other
>  Subsystem ID 00201102h PCI Gameport
>  Subsystem Vendor 1102h Creative Labs
>  Address 0 is an I/O Port : 0000C400h
>  New Capabilities List Present:
>    Power Management Capability, Version 1.0
>      Supports low power State D1
>      Supports low power State D2
>      Does not support PME# signalling
>      Current Power State : D0 (Device operational, no power saving)
> 
>  Vendor 104Ch Texas Instruments (TI)
>  Device 8023h TSB43AB22 1394a-2000 OHCI PHY/Link-Layer Controller
>  Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
>  Status 0210h (Has Capabilities List, Medium Timing)
>  Revision 00h, Header Type 00h, Bus Latency 40h
>  Self test 00h (Self test not supported)
>  Cache line size 16 Bytes (4 DWords)
>  PCI Class Serial, type OHCI FireWire
>  Subsystem ID 808B1043h Unknown
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 0 is a Memory Address (anywhere in 0-4GiB) : DFEFB800h
>  Address 1 is a Memory Address (anywhere in 0-4GiB) : DFEF4000h
>  System IRQ 5, INT# A
>  New Capabilities List Present:
>    Power Management Capability, Version 1.1
>      Supports low power State D1
>      Supports low power State D2
>      Supports PME# from mode(s) D0, D1, D2, D3hot
>      Current Power State : D0 (Device operational, no power saving)
> 
>  Vendor 11ABh Marvell Semiconductor (Was: Galileo Technology Ltd)
>  Device 4320h Yukon 88E8001 Gigabit Ethernet controller
>  Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
>  Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
>  Revision 13h, Header Type 00h, Bus Latency 40h
>  Self test 00h (Self test not supported)
>  Cache line size 16 Bytes (4 DWords)
>  PCI Class Network, type Ethernet
>  Subsystem ID 811A1043h Gigabit Ethernet controller
>  Subsystem Vendor 1043h ASUSTeK Computer Inc
>  Address 0 is a Memory Address (anywhere in 0-4GiB) : DFEFC000h
>  Address 1 is an I/O Port : 0000C800h
>  System IRQ 5, INT# A
>  Expansion ROM of 128 KiB decoded by this card, currently disabled
>  New Capabilities List Present:
>    Power Management Capability, Version 1.1
>      Supports low power State D1
>      Supports low power State D2
>      Supports PME# from mode(s) D0, D1, D2, D3hot, D3cold
>      Current Power State : D0 (Device operational, no power saving)
>       3800 mW D0 power consume
>       3800 mW D1 power consume
>       3800 mW D2 power consume
>       1200 mW D3 power consume
>       3800 mW D0 power dissipate
>       3800 mW D1 power dissipate
>       3800 mW D2 power dissipate
>       1200 mW D3 power dissipate
>    Vital Product Data Capability
> 
>  Vendor 1002h ATI Technologies
>  Device 554Fh Unknown
>  Command 0007h (I/O Access, Memory Access, BusMaster)
>  Status 0010h (Has Capabilities List, Fast Timing)
>  Revision 00h, Header Type 80h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  Cache line size 16 Bytes (4 DWords)
>  PCI Class Display, type VGA
>  Subsystem ID 0600174Bh Unknown
>  Subsystem Vendor 174Bh PC Partner Ltd
>  Address 0 is a Memory Address (anywhere in 64-bit space, Prefetchable) : 00000000E0000000h
>  Address 2 is a Memory Address (anywhere in 64-bit space) : 00000000DFFE0000h
>  Address 4 is an I/O Port : 0000E000h
>  System IRQ 10, INT# A
>  Expansion ROM of 128 KiB decoded by this card, currently disabled
>  New Capabilities List Present:
>    Power Management Capability, Version 1.1
>      Supports low power State D1
>      Supports low power State D2
>      Does not support PME# signalling
>      Current Power State : D0 (Device operational, no power saving)
>    PCI Express Capability, Version 1
>      Device/Port Type : PCI Express Endpoint Device
>      Unsupported Request Severity is Fatal
>      Maximum Link speed : 2.5Gb/s
>      Maximum Link Width : x16
>      Link Port Number   : 0
>      Common Clock Configuration In Use
>      Current Link speed : 2.5Gb/s
>      Current Link Width : x16
>    Message Signalled Interrupt Capability
>      MSI is disabled
>      MSI function can generate 64
> -bit addresses
> 
>  Vendor 1002h ATI Technologies
>  Device 556Fh Unknown
>  Command 0007h (I/O Access, Memory Access, BusMaster)
>  Status 0010h (Has Capabilities List, Fast Timing)
>  Revision 00h, Header Type 00h, Bus Latency 00h
>  Self test 00h (Self test not supported)
>  Cache line size 16 Bytes (4 DWords)
>  PCI Class Display, type Other
>  Subsystem ID 0601174Bh Unknown
>  Subsystem Vendor 174Bh PC Partner Ltd
>  Address 0 is a Memory Address (anywhere in 64-bit space) : 00000000DFFF0000h
>  New Capabilities List Present:
>    Power Management Capability, Version 1.1
>      Supports low power State D1
>      Supports low power State D2
>      Does not support PME# signalling
>      Current Power State : D0 (Device operational, no power saving)
>    PCI Express Capability, Version 1
>      Device/Port Type : PCI Express Endpoint Device
>      Unsupported Request Severity is Non-Fatal
>      Maximum Link speed : 2.5Gb/s
>      Maximum Link Width : x16
>      Link Port Number   : 0
>      Common Clock Configuration In Use
>      Current Link speed : 2.5Gb/s
>      Current Link Width : x16
> 
> 
> PCI slot IRQ mapping information
>  PCI slot mapping information read successfully
> 
>  PCI slot IRQ availability listing
> 
>   PCI Bus 0, Device 1, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 3, Device 0, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   PCI Bus 0, Device 30, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   PCI Bus 0, Device 28, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 1, Device 8, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   PCI Bus 0, Device 31, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 0, Device 29, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 0, Device 27, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   PCI Bus 2, Device 0, Slot 01
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 255, Device 0, Slot 03
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 255, Device 0, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 255, Device 0, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   PCI Bus 1, Device 0, Slot 01
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 1, Device 1, Slot 02
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 1, Device 2, Slot 03
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTC# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTD# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
> 
>   PCI Bus 1, Device 3, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   PCI Bus 1, Device 4, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   PCI Bus 1, Device 5, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   PCI Bus 1, Device 15, Slot 00
>    INTA# can be connected to IRQs 3,4,5,6,7,10,11,12,14,15 
>    INTB# can be connected to IRQs None
>    INTC# can be connected to IRQs None
>    INTD# can be connected to IRQs None
> 
>   Error: table entries 9 and 10 refer to the same Bus=255/Device=0!
>   Error: table entries 9 and 11 refer to the same Bus=255/Device=0!
>   Error: table entries 10 and 11 refer to the same Bus=255/Device=0!
> 
>  PCI slot INTx to IRQ-router mappings
> 
>   SLOT BUS DEV  INTA INTB INTC INTD
>    MB   0   1    60   61   62   63  
>           IRQ:   10                 Unknown
>           Bridge **   **   **   **  Unknown
>           IRQ:   10                 Unknown
>    MB   3   0    60   00   00   00  
>           IRQ:   10                 Unknown
>    MB   0  30    60   61   00   00  82801BA/CA/DB/DBL/EB/ER (ICH2/3/4/4-L/5/..
>           IRQ:    5                 EMU10K1 Audio Chipset (SB Live!)
>           IRQ:    5                 TSB43AB22 1394a-2000 OHCI PHY/Link-Layer..
>           IRQ:    5                 Yukon 88E8001 Gigabit Ethernet controller
>    MB   0  28    60   61   62   63  
>           IRQ:   10                 Unknown
>           Bridge **   **   **   **  Unknown
>    MB   1   8    68   00   00   00  No Device Detected
>    MB   0  31    6A   6B   00   63  
>           IRQ:         5            Unknown
>           IRQ:         0            Unknown
>    MB   0  29    68   61   62   63  
>           IRQ:   11                 Unknown
>           IRQ:         5            Unknown
>           IRQ:              3       Unknown
>           IRQ:                   5  Unknown
>           IRQ:   11                 Unknown
>    MB   0  27    63   00   00   00  No Device Detected
>    01   2   0    60   61   62   63  No Device Detected
>    03  255   0    62   63   60   61  No Device Detected
>    MB  255   0    60   00   62   63  No Device Detected
>    MB  255   0    61   00   00   00  No Device Detected
>    01   1   0    69   6A   6B   68  No Device Detected
>    02   1   1    6A   6B   68   69  No Device Detected
>    03   1   2    6B   68   69   6A  
>           IRQ:    5                 EMU10K1 Audio Chipset (SB Live!)
>    MB   1   3    69   00   00   00  
>           IRQ:    5                 TSB43AB22 1394a-2000 OHCI PHY/Link-Layer..
>    MB   1   4    63   00   00   00  No Device Detected
>    MB   1   5    69   00   00   00  
>           IRQ:    5                 Yukon 88E8001 Gigabit Ethernet controller
>    MB   1  15    68   00   00   00  No Device Detected
> 
> Error for link value 60:
> can not connect to more than one of IRQ 5,10
>  IRQ's dedicated to PCI : None
> 
> ROM PCI IRQ routing table Tests....
>  ROM IRQ routing table found at F000h:7A20h
>  Table Version 1.0 - OK
>  Table size 336 bytes - OK
>  Table Checksum 4Fh - OK
>  IRQ's dedicated to PCI : None
>  The ROM PCI IRQ routing table appears to be faulty!!
> 
> IRQ Summary: IRQs 3,5,10,11,14,15 are used by PCI devices
> Shared IRQs: IRQ 5 is shared by 6 PCI Devices
>              IRQ 10 is shared by 3 PCI Devices
>              IRQ 11 is shared by 2 PCI Devices
> 
>

_, __, _, __, /_\ \|_) /_\ \|_) \| \| \| \| \| \| \ ~ ~ ~ ~ ~ ~ ~